AC7000V Electroshock-proof AC Ionizing Bar Fast static discharging
The AP-AB1113 ion bar is a rod-type static elimination device
developed by AP&T to eliminate static electricity on the
surface of objects.
The AP-AB1113 ion bar adopts the power frequency AC high voltage,
acts on the special emitter electrode through the impedance
coupling device, ionizes the air molecules, generates positive and
negative ions, and delivers to the surface of the static
elimination object, neutralizing the positive and negative
electrostatic charges, achieving high efficiency. , the purpose of
reliable elimination of static electricity.
Can be widely used in film, printing, plastic, textile and other
1. It is a rod type and horizontal type active static eliminator.
2, the bar is small, saving installation space.
3. High voltage, micro current (μA level) working state.
4. Fast static discharging.
5, tungsten electrode, long-term ionization ability.
6, with anti-shock function, to avoid accidental touch caused by
human body injury.
7,Special strip-shaped notches on the back of the rod, the mounting
bolts can be moved.
|Ion emission||Power frequency communication|
|Discharge structure||Resistance coupling|
|Discharging speed||≤1.0S(working distance100mm)|
|Operating temperature||0°C - 50°C|
|Rod material||Flame retardant PVC, AL|
|Mounting accessories||M4×20 hex mounting bolts|
|Supporting power supply||AP-AY1504/ AP-AY2504|
|High-voltage cable length||2.5m (can be customized according to requirements, the longest size
|Warranty period||1 year|
1. In order to ensure the good performance of the product, it
should be cleaned and maintained in time according to the use
environment and the required static protection requirements. That
is, use an electrostatic brush, a dust-free cotton swab, a
dust-free cloth, and remove the anhydrous alcohol. The performance
of the carbon deposits on the electrodes and rods is significantly
A. It must be operated 10 minutes after the power is turned off.
B. During the use of the ion bar, when there is dust or white
matter on the tip of the needle, it must be cleaned. When the brush
is not used to meet the cleaning requirements, use a dust-free
cotton swab to remove anhydrous alcohol.
C. After cleaning, the alcohol must be completely evaporated and
then energized. Do not use any other organic solvent to clean the
2. It is found that the ion bar appears to be burnt, it should be
stopped, and it should be inspected and repaired by professional
maintenance personnel. It can be used after the electrical
performance index is normal.
◆ After-sale service
AP-AB1113 anti-shock AC ion bar has undergone rigorous testing and
aging treatment before leaving the factory, and its performance
fully meets the relevant indicators marked in the instructions for
1. AP&T makes the following commitments to the user: Within one
year from the date of purchase, the company will repair or replace
any parts that have been inspected by the company for free.
However, this commitment does not apply to the following:
(1) The device was misused and installed;
(2) Inadvertent or accidental damage during use;
(3) Self-modification, disassembly, or repair by other service
departments not authorized by Anping.
2. The discharge electrode is a consumable item and is not covered
by the warranty. The company has to charge for the replacement of
4. AP&T assumes no responsibility or liability for product
users other than repair or replacement of components within this
◆ Packing accessories
- Warranty card
- Instruction manual
- M4 mounting bolts (2 bolts in 1m length, 0.5m increase in rod
length, 1 bolt added)